Cross Equal, for Galvanized Iron Water Pipes Manufacturer,Supplier and Exporter in India
Product Code : EL-WS-10477
Written by Palak Mall, Senior Content Writer · reviewed by Arvind Kumar, Lab Equipment Specialist, 12+ years in laboratory supply · updated 17 October 2026
The Cross Equal, for Galvanized Iron Water Pipes is a four-way fitting with all four ports female, for 4 inch nominal pipe, in malleable cast iron hot dip galvanized and threaded after galvanizing. Each port has an internal female parallel thread, the fitting is rated for 14 bar (200 lb per square inch), and it appears among the galvanized fittings in Water and Sanitation.
What is specified
| Detail | Figure listed |
|---|---|
| Type | Equal cross, four ports |
| Ports | All female |
| Thread | Internal female, parallel |
| Material | Malleable cast iron |
| Finish | Hot dip galvanized, threaded after galvanizing |
| Nominal diameter | 4 inch, all ports |
| Pressure | 14 bar (200 lb per square inch) |
Where a cross earns its place
A cross joins four runs at one point, typically where a main meets two branches at the same spot. Because all four ports are the same size, an unused outlet can be closed with a 4 inch plug rather than a reducing fitting. For a three-way junction that steps down on the side, see the Tee Reduction, for Water Pipes.
Questions buyers ask
Are all four outlets the same size?
Yes. It is an equal cross, 4 inch nominal on every port.
Is it male or female?
All four ports are female, with internal parallel threads.
Request a quotation
Cross quantities, and any matching fittings, can be sent through the contact page.
