Reducing Tee Manufacturer,Supplier and Exporter in India
Product Code : EL-WS-10492
Written by Palak Mall, Senior Content Writer · reviewed by Arvind Kumar, Lab Equipment Specialist, 12+ years in laboratory supply · updated 17 October 2026
The Reducing Tee is a solvent cement tee for PVC pipe, female on all three ends, sized 110 mm by 90 mm. Unplasticised PVC throughout, it carries a rating of 10 bar at 20°C, is listed for 0 to 50°C, and is the reducing branch fitting for uPVC lines in Water and Sanitation.
What is specified
| Detail | Figure listed |
|---|---|
| Type | Tee, reducing |
| Ends | Female, all three |
| Joint | Solvent cement |
| Sizes | 110 mm x 90 mm outside diameter |
| Material | Unplasticised PVC |
| Pressure | 10 bar at 20°C |
| Temperature | 0 to 50°C |
Branching at a smaller size
A reducing tee takes a branch off a main at a smaller size in one fitting, saving a tee and a reducer. The galvanized iron equivalent, the Tee Reduction, for Water Pipes, does the same on threaded pipe at 2½ by 2 inch.
Questions buyers ask
What are the sizes?
110 mm and 90 mm outside diameter.
How are the joints made?
By solvent cement, into female sockets on all three ends.
Request a quotation
Send the quantity of reducing tees, with the outlet layout from the drawings, through the contact page.
